# Bavlio > Bavlio's REST API: find leads, run LinkedIn and email campaigns, answer replies and book meetings. Send a bav_ API key as a Bearer token to https://api.bavlio.com. - [Bavlio API](https://bavlio.com/docs/introduction.md): Find leads, run LinkedIn and email campaigns, answer replies and book meetings through one REST API. - [Quickstart](https://bavlio.com/docs/quickstart.md): Get an API key, make your first call, pick a workspace and read your campaigns. Five minutes from nothing to a first response. - [Authentication](https://bavlio.com/docs/authentication.md): bav_ API keys, the Bearer header, choosing a workspace and rotating keys. - [Errors & Idempotency](https://bavlio.com/docs/errors.md): One JSON error body with a stable code, what each status means, when to retry, and the Idempotency-Key header. - [Pagination](https://bavlio.com/docs/pagination.md): Two lists come in pages with a cursor. Every other list comes whole. - [Rate Limits](https://bavlio.com/docs/rate-limits.md): There is no general request limit. A few actions have their own, and LinkedIn and email sending follow daily caps. - [MCP (Model Context Protocol)](https://bavlio.com/docs/integrations/mcp.md): Connect Claude, Cursor or any MCP client to your Bavlio account, and let AI tools read these docs as Markdown. - [API Reference](https://bavlio.com/docs/api-reference/introduction.md): Every endpoint of the Bavlio API, generated from the contract the API is built from. - [Start a registration](https://bavlio.com/docs/api-reference/registration/start-registration.md): Creates an ephemeral account and an API key for it, without any credentials. Given an email address, it also sends the verification email that makes the account permanent; without one, claim the registration later. Starts are rate limited per IP address. - [Get the current account](https://bavlio.com/docs/api-reference/auth/whoami.md): Returns the account the bearer token belongs to. Its status stays ephemeral until the email address is verified. - [Get a registration](https://bavlio.com/docs/api-reference/auth/get-registration.md): Returns one of the calling account's registrations. While it awaits verification, each call checks the email address and, once it is verified, marks the registration verified and the account active. Poll it after the verification email goes out. - [Claim a registration](https://bavlio.com/docs/api-reference/auth/claim-registration.md): Sends the verification email to the given address; following its link makes the account permanent. Call it again to resend the email or change the address, until the registration is verified. Verification emails are rate limited per registration. - [List API keys](https://bavlio.com/docs/api-reference/auth/list-api-keys.md): Returns every API key of the calling account, revoked ones included. Secrets are never returned after creation. - [Create an API key](https://bavlio.com/docs/api-reference/auth/create-api-key.md): Creates an API key for the calling account. The secret is returned only in this response. - [Revoke an API key](https://bavlio.com/docs/api-reference/auth/revoke-api-key.md): Revokes one of the calling account's API keys for good: requests that use it are rejected from then on. Revoking a key that is already revoked changes nothing. - [Delete your account](https://bavlio.com/docs/api-reference/accounts/delete-account.md): Starts deleting the signed-in account and answers 202 at once. Every workspace it owns is erased with its campaigns, leads and connected accounts, it leaves the workspaces it is a member of, and it can no longer sign in. Only a signed-in session on the Bavlio website may ask: an API key or an MCP sign-in gets account_deletion_needs_session. A workspace you own that still has teammates stops it until you transfer the workspace or remove them. - [Get the workspace](https://bavlio.com/docs/api-reference/workspaces/get-workspace.md): Returns the workspace the call acts in: its company profile, booking link, outreach schedule and onboarding state. - [Save the company profile](https://bavlio.com/docs/api-reference/workspaces/save-workspace-profile.md): Replaces the workspace's company profile and needs the owner or admin role. When the account has no workspace yet and no bavlio-workspace header is sent, it creates the account's first workspace from the profile instead. - [Update the workspace setup](https://bavlio.com/docs/api-reference/workspaces/update-workspace-setup.md): Changes the booking link, attribution and outreach schedule. Only the fields sent change. Needs the owner or admin role. - [Complete workspace onboarding](https://bavlio.com/docs/api-reference/workspaces/complete-workspace-onboarding.md): Records that onboarding is finished by setting onboarded_at; calling it again keeps the first time. Needs the owner or admin role. - [Update your email notices](https://bavlio.com/docs/api-reference/workspaces/update-membership.md): Replaces which email notices the calling member receives from the workspace. Every member, whatever the role, chooses their own. - [Hide a banner](https://bavlio.com/docs/api-reference/workspaces/hide-banner.md): Hides a banner for the calling member in this workspace, for good. Other members keep seeing it. - [List workspaces](https://bavlio.com/docs/api-reference/workspaces/list-memberships.md): Returns every workspace the account belongs to, with the account's role there, whether it is the default workspace and the account's email notices. - [Create a workspace](https://bavlio.com/docs/api-reference/workspaces/create-workspace.md): Creates a workspace from a company profile, owned by the calling account, with its own team and billing. It becomes the default workspace only when the account had none. - [Set the default workspace](https://bavlio.com/docs/api-reference/workspaces/set-default-workspace.md): Makes one of the account's workspaces the default, which calls without a bavlio-workspace header act in. Returns all of the account's workspaces. - [Draft a workspace](https://bavlio.com/docs/api-reference/workspaces/draft-workspace.md): Reads the company's homepage, or takes a short description, and drafts a company profile, an ideal customer profile and buying signals for a first campaign. Nothing is saved, and the account needs no workspace yet. - [Get the team](https://bavlio.com/docs/api-reference/teams/get-team.md): Returns the workspace's members and the invitations sent from it, expired ones included. Every member can read it. - [Change a member's role](https://bavlio.com/docs/api-reference/teams/change-member-role.md): Makes a member an admin or a member and returns the team. The owner's role cannot change here: transfer ownership instead. Needs the owner or admin role. - [Remove a member](https://bavlio.com/docs/api-reference/teams/remove-member.md): Removes a member from the workspace, frees their team seat and returns the team. Any member but the owner can remove themselves to leave; removing someone else needs the owner or admin role. The owner cannot be removed. - [Transfer ownership](https://bavlio.com/docs/api-reference/teams/transfer-ownership.md): Makes another member the owner of the workspace; the previous owner stays on as an admin. Only the owner can transfer ownership. - [Invite a team member](https://bavlio.com/docs/api-reference/teams/invite-member.md): Emails an invitation to join the workspace, open for 14 days; inviting the same address again renews it. Members and open invitations together cannot exceed the team seats of the workspace's plan. Needs the owner or admin role and a verified email address. - [Revoke an invitation](https://bavlio.com/docs/api-reference/teams/revoke-invitation.md): Deletes an invitation sent from the workspace, open or expired, which frees its team seat. Needs the owner or admin role. - [List received invitations](https://bavlio.com/docs/api-reference/teams/list-received-invitations.md): Returns the open invitations sent to the calling account's email address, from any workspace. - [Accept an invitation](https://bavlio.com/docs/api-reference/teams/accept-invitation.md): Joins the invitation's workspace with the role it offers and returns the new membership. Needs a verified email address and a free team seat in that workspace. The workspace becomes the default only when the account had none. - [Decline an invitation](https://bavlio.com/docs/api-reference/teams/decline-invitation.md): Deletes an invitation sent to the calling account's email address and returns the invitations still open. - [List campaigns](https://bavlio.com/docs/api-reference/campaigns/list-campaigns.md): Returns the workspace's campaigns that are not archived, newest first, each with its ICP, signals and daily activity. - [List recent campaign activity](https://bavlio.com/docs/api-reference/campaigns/list-campaign-activity.md): Returns what the workspace's campaigns that are not archived did over the last two days, in quarter hours and in UTC, so a client can add them up into the hours of any timezone. - [Create a campaign](https://bavlio.com/docs/api-reference/campaigns/create-campaign.md): Creates a campaign from an ICP and buying signals, with the default sequence. A running campaign needs at least one job title. While it runs on a subscribed workspace, it adds the leads its signals surface once a day, which spends credits, and works its leads through the sequence. - [Get a campaign](https://bavlio.com/docs/api-reference/campaigns/get-campaign.md): Returns one campaign of the workspace. Archived campaigns are returned too, with status paused. - [Update a campaign](https://bavlio.com/docs/api-reference/campaigns/update-campaign.md): Changes only the fields given and returns the campaign. Pausing holds the campaign's outreach and running it again resumes it. A campaign that has reached a lead keeps its LinkedIn sender. - [Archive a campaign](https://bavlio.com/docs/api-reference/campaigns/archive-campaign.md): Stops the campaign for good: its outreach is held, its signals stop and it leaves the campaign list. This cannot be undone; archiving an archived campaign changes nothing. - [List a campaign's leads](https://bavlio.com/docs/api-reference/campaigns/list-campaign-leads.md): Returns the leads the campaign has found, rejected ones left out, with their stage, fit and the signals that surfaced them. - [Find leads for a campaign](https://bavlio.com/docs/api-reference/campaigns/find-campaign-leads.md): Finds new people for the campaign, signal matches first, adds them to it and returns only the leads added. The campaign's ICP needs at least one value. Without a subscription the workspace gets 5 preview leads in total; with one, each lead found spends credits. - [Reject a lead](https://bavlio.com/docs/api-reference/campaigns/reject-campaign-lead.md): Marks a lead as not a fit, with the reason. The lead leaves the campaign's leads and the person is left out of the workspace's future finds. - [List a campaign's activity](https://bavlio.com/docs/api-reference/campaigns/list-campaign-events.md): Returns the campaign's activity, newest first, 200 events a page: each lead found and each stage a lead reached, from visited to meeting. Pass a page's next_cursor as cursor to read the older page after it. - [Get a campaign's outreach progress](https://bavlio.com/docs/api-reference/campaigns/get-campaign-outreach.md): Returns how many of the campaign's leads are in each state of its sequence, and the next steps due, soonest first. - [Search companies](https://bavlio.com/docs/api-reference/companies/search-companies.md): Finds companies by name, best match first, up to 12, each with its LinkedIn company page. A pasted LinkedIn company page URL returns that one company, or none when it is not a known page. Only companies with a LinkedIn company page are returned. Searching is free. - [List recommended competitors](https://bavlio.com/docs/api-reference/companies/list-recommended-competitors.md): Returns up to 9 companies that compete with the workspace's company for the campaign's ICP, best known first, each with its LinkedIn company page, to pick for the engaging-with-competitors signal. Bavlio drafts them once and keeps them until the company profile or the campaign's ICP changes, or for 30 days. Recommending is free. - [List the do-not-contact list](https://bavlio.com/docs/api-reference/do-not-contact/list-do-not-contact.md): Returns up to 100 entries per page, newest first. Pass next_cursor as cursor for the next page. - [Add to the do-not-contact list](https://bavlio.com/docs/api-reference/do-not-contact/add-to-do-not-contact.md): Adds every company website, LinkedIn company or profile URL and email address in text: one value, one per line, or a whole CSV. A website stands for its whole registrable domain. Leads that match are never added to a campaign, and leads already in a campaign leave its sequence before their next step. Free email domains such as gmail.com are never listed as companies. Answers 400 do_not_contact_nothing_to_add when text holds none, and 400 do_not_contact_unreadable when it is not a readable CSV. - [Remove from the do-not-contact list](https://bavlio.com/docs/api-reference/do-not-contact/remove-from-do-not-contact.md): Deletes one entry and returns it. Campaigns can then find and reach whoever it matched again. Leads that already left a sequence because of it stay out. Needs the owner or admin role. - [Preview a lead file](https://bavlio.com/docs/api-reference/lead-imports/preview-lead-import.md): Reads a CSV of your own leads without importing it: its columns, row count, the first rows, which column holds each lead field and which other columns could become custom fields, as Bavlio suggests them. needs lists what the campaign's sequence needs from every lead, so you can see which columns matter. - [Import leads into a campaign](https://bavlio.com/docs/api-reference/lead-imports/import-campaign-leads.md): Starts importing a CSV of your own leads into the campaign with the column mapping you confirm, and answers 201 with the import while it runs. A lead costs no credits when the file already holds everything the sequence needs, and one credit when Bavlio fills a needed field in; rows without a name, without what the sequence needs, already in the campaign, opted out or beyond your credits are skipped and counted. Bavlio scores each lead against the campaign's ICP, so the ICP needs at least one value. Needs a plan. - [List a campaign's lead imports](https://bavlio.com/docs/api-reference/lead-imports/list-lead-imports.md): Returns the campaign's 20 latest lead imports, newest first, with their progress and what was added or skipped. - [Get a campaign's sequence](https://bavlio.com/docs/api-reference/sequences/get-campaign-sequence.md): Returns the campaign's latest sequence version with, for each step, how many leads reached it and converted at it, and the template warnings of its steps. - [Save a campaign's sequence](https://bavlio.com/docs/api-reference/sequences/save-campaign-sequence.md): Saves the steps as the campaign's next sequence version and returns it, with warnings for template problems that did not stop the save. Leads already in the sequence carry on from the step with the same id, so keep the ids of steps you keep. Invite notes and the first message template on each path may not contain a link or {@booking_link}. Bavlio gives every A/B test its id and letters its paths a, b, c and d in order: leave the id out of a new test, and send a test's id as you read it to keep that test. - [Keep a path of an A/B test](https://bavlio.com/docs/api-reference/sequences/pick-ab-test-winner.md): Ends the A/B test by hand: every new lead gets the path from now on, and once nobody is left on another path the sequence keeps only its steps. Keeping the path already kept changes nothing; keeping another one once the test is decided answers 409. - [Preview an AI-written step](https://bavlio.com/docs/api-reference/sequences/preview-sequence-step.md): Writes one message or email from the brief for a real lead in the campaign, the same way Bavlio writes it when the lead reaches the step, and returns it without saving or sending anything. Send after_lead_id to write the next preview for the lead after that one. Previews are free and limited per workspace; past the limit the answer is 429 with the seconds to wait. - [List conversations](https://bavlio.com/docs/api-reference/inbox/list-conversations.md): Lists the workspace's conversations, latest message first, 50 per page. By default these are conversations with people your campaigns reached; scope other lists LinkedIn and email conversations outside campaigns from accounts whose all_messages is on. - [Get a conversation](https://bavlio.com/docs/api-reference/inbox/get-conversation.md): Returns a conversation from either scope with its whole transcript, oldest message first. - [Send a reply](https://bavlio.com/docs/api-reference/inbox/send-conversation-reply.md): Sends your reply to the person at once on the conversation's reply_channel: on LinkedIn from the conversation's LinkedIn account, or by email in the same thread from the inbox it went through. Returns the conversation with the reply filed; on a campaign conversation it also clears needs_reply and suggested_reply. Send an Idempotency-Key header to make a retry safe. - [Draft a reply](https://bavlio.com/docs/api-reference/inbox/draft-conversation-reply.md): Has Bavlio draft your next message now and stores it as suggested_reply, for you to edit and send: a reply when the person wrote last, a short follow-up when you did. Nothing goes out. A conversation that already has a suggested_reply comes back unchanged. Works in both scopes, except where the campaign wrote last and is waiting for the person. - [Mark a conversation read](https://bavlio.com/docs/api-reference/inbox/mark-conversation-read.md): Resets the conversation's unread_count to 0 and returns the conversation with its transcript. Nothing changes on LinkedIn or in the mailbox. - [Watch inbox changes](https://bavlio.com/docs/api-reference/inbox/watch-inbox.md): Opens a server-sent event stream that announces each change to the workspace's inbox, so a client knows when to list conversations or LinkedIn accounts again. Each event's data is a JSON object whose change is conversations (a conversation or message was added or updated), linkedin_senders or mail (a LinkedIn account's or the email account's message import moved on), or alive (a keep-alive sent every 25 seconds). - [List the review queue](https://bavlio.com/docs/api-reference/reviews/list-reviews.md): Returns up to 50 drafts waiting for approval per page: replies to people who answered and sequence messages together, oldest first unless order says newest. Filter by campaign_id or sender_id, and pass next_cursor as cursor for the next page. Each comes with the lead, the signals that surfaced them and the conversation so far. - [Approve a review](https://bavlio.com/docs/api-reference/reviews/approve-review.md): Approves a draft, or copy_override in its place, and returns the reviews still waiting. A reply is sent at once on the channel the person last wrote on; a sequence message goes out in the next send window, within the sender's limits, and the lead's sequence moves on. Send an Idempotency-Key header to make a retry safe. - [Get billing](https://bavlio.com/docs/api-reference/billing/get-billing.md): Returns the plans on offer (cheapest first), the workspace's current subscription if it has one, and the usage of each entitlement: credits, LinkedIn accounts, email inboxes and team members. - [List the credit log](https://bavlio.com/docs/api-reference/billing/list-credit-log.md): Lists what the workspace's credits were spent on, newest first: the operation, the campaign, how many leads and how many credits. One entry per kind of lead per batch of found leads. - [Get a plan quote](https://bavlio.com/docs/api-reference/billing/quote-plan.md): Previews what subscribing to a plan would do, without changing anything: the amount due now, when the plan starts, the next charge and whether a card must be added at checkout first. - [Subscribe to a plan](https://bavlio.com/docs/api-reference/billing/subscribe.md): Subscribes the workspace to a plan, or switches its subscription to it, which can charge the workspace; Get a plan quote shows the charge and start date first. When a card must be added first the answer carries a payment_url to open, otherwise the subscription after the change. A workspace already on that plan gets its subscription back unchanged. - [Cancel the subscription](https://bavlio.com/docs/api-reference/billing/cancel-subscription.md): Cancels the workspace's subscription at the end of its current trial or billing period, at ends_at. Until then it can be withdrawn with DELETE on the same path. - [Withdraw the cancellation](https://bavlio.com/docs/api-reference/billing/withdraw-cancellation.md): Withdraws a pending cancellation or a scheduled switch to another plan, so the subscription renews on its current plan, and returns the subscription. - [Open the billing portal](https://bavlio.com/docs/api-reference/billing/open-billing-portal.md): Creates a billing portal session and returns its URL, where the card, billing details and invoices are managed; it leads back to Bavlio's plan settings. Plan changes and cancellation go through this API instead. - [List LinkedIn accounts](https://bavlio.com/docs/api-reference/linkedin/list-linked-in-senders.md): Lists every LinkedIn account of the workspace that campaigns can send from, with its status as the LinkedIn connector reports it now, any sign-in waiting to be confirmed, the campaigns sending from it and any hold after a LinkedIn limit. - [List LinkedIn countries](https://bavlio.com/docs/api-reference/linkedin/list-linked-in-countries.md): Lists the countries a LinkedIn account can be connected from, with the caller's country as detected from the request and the supported country to suggest. Choose the country the account's owner normally uses LinkedIn from. - [Connect a LinkedIn account](https://bavlio.com/docs/api-reference/linkedin/connect-linked-in.md): Signs in to LinkedIn with the member's email and password from the chosen country, and takes a LinkedIn account seat on the plan once connected. With sender_id it signs a disconnected account in again, so its campaigns resume. When LinkedIn asks to confirm the sign-in, status is checkpoint_required and checkpoint_type says how: finish with Confirm a LinkedIn sign-in. - [Confirm a LinkedIn sign-in](https://bavlio.com/docs/api-reference/linkedin/verify-linked-in-checkpoint.md): Finishes a sign-in that is checkpoint_required, with the code LinkedIn sent or, for checkpoint_type app_approval, with no code once the member approved it in the LinkedIn app. Until LinkedIn sees the approval the account stays checkpoint_required; once connected it takes a LinkedIn account seat on the plan. - [Resend the LinkedIn sign-in code](https://bavlio.com/docs/api-reference/linkedin/resend-linked-in-code.md): Asks LinkedIn to send the sign-in code again while the account is checkpoint_required. Returns the account, with sent_to saying where the new code went. - [Move a LinkedIn account's country](https://bavlio.com/docs/api-reference/linkedin/move-linked-in-country.md): Moves a connected account to a connection in another country and returns it with its new country. When LinkedIn refuses the account from that country nothing changes: disconnect it and connect it again choosing that country. - [Choose which LinkedIn conversations sync](https://bavlio.com/docs/api-reference/linkedin/set-linked-in-all-messages.md): On, the inbox also keeps the account's conversations outside campaigns: Bavlio brings in its 50 most recent conversations in the background, then every new message, and message_import shows the progress. Off, it keeps only campaign conversations and deletes the account's other conversations from Bavlio; nothing changes on LinkedIn. Campaign conversations are never affected. - [Check LinkedIn Premium](https://bavlio.com/docs/api-reference/linkedin/check-linked-in-premium.md): Reads from LinkedIn whether the connected account has a paid plan and returns the account with kind and premium_checked_at. Bavlio already checks it every week, and daily while a campaign watches the account's profile viewers: call this after buying or cancelling Premium. Within 10 minutes of the last check it returns the account as it was, without asking LinkedIn again. - [Disconnect a LinkedIn account](https://bavlio.com/docs/api-reference/linkedin/disconnect-linked-in.md): Signs the account out at the LinkedIn connector, frees its seat on the plan and deletes its conversations outside campaigns from Bavlio. Its campaigns stay bound to it and pause until it is connected again; an account no campaign uses is removed. Returns the remaining accounts. - [List meetings](https://bavlio.com/docs/api-reference/meetings/list-meetings.md): Returns the workspace's meetings imported from its calendar tools, earliest start first, with each one's matched lead and campaign, plus summary counts. from and to narrow the list by start time; the counts always cover every meeting. - [Cancel a meeting](https://bavlio.com/docs/api-reference/meetings/cancel-meeting.md): Cancels the booking in the connected calendar tool, which tells the invitee, and marks the meeting canceled. A meeting from a calendar that is no longer connected is only marked canceled in Bavlio. - [Mark a meeting as a no-show](https://bavlio.com/docs/api-reference/meetings/mark-meeting-no-show.md): Records that the invitee did not attend a meeting that has started, and reports it to Calendly or Cal.com when the meeting came from the connected one. A meeting already marked a no-show is returned unchanged. - [Get the calendar setup](https://bavlio.com/docs/api-reference/meetings/get-calendar.md): Returns the workspace's booking link and its connected calendar tool with the connection's status and last sync. - [Connect a calendar](https://bavlio.com/docs/api-reference/meetings/connect-calendar.md): Returns the calendar tool's consent URL to open in a browser. After consent the calendar is connected, its recent bookings are imported and new ones are followed. A connected calendar must be disconnected first; one that needs reconnecting is replaced. - [Disconnect the calendar](https://bavlio.com/docs/api-reference/meetings/disconnect-calendar.md): Stops following the connected calendar tool, revokes Bavlio's access and forgets its tokens. Meetings already imported stay. Does nothing when no calendar is connected. - [Get the Bavimail connection](https://bavlio.com/docs/api-reference/mail/get-mail.md): Returns the Bavimail account the workspace sends email from, or null in bavimail when none is connected. - [Connect a Bavimail account](https://bavlio.com/docs/api-reference/mail/connect-bavimail.md): Returns the Bavimail consent URL to open in a browser; after consent, Bavimail sends the browser back to Bavlio and the account is connected. A connected account, even one that needs reconnecting, must be disconnected first. - [Disconnect the Bavimail account](https://bavlio.com/docs/api-reference/mail/disconnect-bavimail.md): Withdraws Bavlio's access to the account, removes its inboxes and imported non-campaign emails from Bavlio and frees their inbox seats; nothing is deleted in Bavimail. Campaigns send no email until an account with inboxes is connected again. Does nothing when no account is connected. - [Choose which Bavimail emails to keep](https://bavlio.com/docs/api-reference/mail/set-bavimail-all-messages.md): Off, the default, keeps only campaign emails and their replies. On also imports the account's other email threads, the last 30 days first and then each new one, in the background. Turning it off deletes those other conversations from Bavlio; nothing changes in Bavimail. - [List sending domains](https://bavlio.com/docs/api-reference/mail/list-mail-domains.md): Returns the connected Bavimail account's sending domains, each with the DNS records to publish, the state of each check and its tracking domain. - [Add a sending domain](https://bavlio.com/docs/api-reference/mail/add-mail-domain.md): Adds a domain the workspace controls to the connected Bavimail account and returns the DNS records to publish at its DNS host. Inboxes on it can send once its state is ready. - [Get a sending domain](https://bavlio.com/docs/api-reference/mail/get-mail-domain.md): Returns one sending domain with its DNS records and the current state of each check. - [Remove a sending domain](https://bavlio.com/docs/api-reference/mail/remove-mail-domain.md): Removes the domain from Bavimail and its inboxes from Bavlio, freeing their seats; campaigns stop sending from them. Returns the remaining domains. - [Add a tracking domain](https://bavlio.com/docs/api-reference/mail/add-tracking-domain.md): Adds a tracking hostname under the sending domain for open and click tracking. Publish the records in the tracking part of the answer, then check the tracking domain; tracking works once its state is active. - [Check a tracking domain now](https://bavlio.com/docs/api-reference/mail/verify-tracking-domain.md): Asks Bavimail to check the tracking hostname's DNS records right away and returns the domain as it stands after the check. The domain needs a tracking domain. - [Remove a tracking domain](https://bavlio.com/docs/api-reference/mail/remove-tracking-domain.md): Removes the domain's tracking hostname; emails from its inboxes then go out without open and click tracking. - [List email inboxes](https://bavlio.com/docs/api-reference/mail/list-inboxes.md): Returns the inboxes campaigns send email from, with each one's warm-up and today's cold-email limit, and the plan's inbox seats. - [Create an email inbox](https://bavlio.com/docs/api-reference/mail/create-inbox.md): Creates the address local_part@domain in Bavimail and starts warming it up. Takes one inbox seat of the plan; campaigns send cold email from it as the warm-up allows. - [Update an email inbox](https://bavlio.com/docs/api-reference/mail/update-inbox.md): Changes the inbox's signature or warm-up speed; a field left out stays as it is. - [Delete an email inbox](https://bavlio.com/docs/api-reference/mail/delete-inbox.md): Deletes the inbox in Bavimail and frees its seat; campaigns stop sending from it. Returns the remaining inboxes. - [Search places](https://bavlio.com/docs/api-reference/locations/search-locations.md): Finds up to 12 continents, countries, states or regions and cities whose name or code matches what the user typed, best match first: names that start with the text, then names with a word that starts with it, then names that contain it, the given country's places first, then bigger places. Accents and case are ignored. Each place's path is the value a campaign's locations take.